Storing An Mx2020 Mpc; Figure 176: Do Not Rest The Mpc On An Edge - Juniper MX2020 Hardware Manual

3d universal edge router

Hide thumbs Also See for MX2020:

Table of Contents

MX2020 3D Universal Edge Router Hardware Guide

Documentation

Storing an MX2020 MPC

If you must rest the MPC temporarily on an edge while changing its orientation between

vertical and horizontal, use your hand as a cushion between the edge and the surface.

MX2020 MPC Terminology on page 73

Storing an MX2020 MPC on page 406

Troubleshooting the MX2020 MPCs on page 538

Replacing an MX2020 MPC on page 485

You must store an MPC as follows:

In the router

In the container in which a spare MPC is shipped

Horizontally and sheet metal side down

When you store an MPC on a horizontal surface or in the shipping container, always place

it inside an antistatic bag. Because the MPC is heavy, and because antistatic bags are

fragile, inserting the MPC into the bag is easier with two people. To do this, one person

holds the MPC in the horizontal position with the faceplate facing the body, and the other

person slides the opening of the bag over the MPC connector edge.