Figure 97: Preparing The Router Transport Kit For Installation - Juniper MX2020 Hardware Manual

Copyright © 2015, Juniper Networks, Inc.
Router transport platform
Router transport left and right mounting plates with adjustable wheel assembly
Router winch mount with winch strap plate
To install the router transport kit:
Remove the router transport kit from the shipping crate (see
1.
Transport Kit" on page
NOTE: The router transport kit weighs approximately 138.5 lb (62.82 kg).
Remove the winch strap plate that is secured to the winch mount using a
2.
9/16-in. (14 mm) socket wrench, and set aside.
Using a number 3 Phillips screwdriver, loosen the captive screws that secure the winch
3.
mount to the router transport kit, and set aside.
Using a number 3 Phillips screwdriver, loosen the captive screws that secure the router
4.
transport mounting plate and wheel assembly (left and right) to the router transport
platform, and set them aside (see

Figure 97: Preparing the Router Transport Kit for Installation

Remove the four shipping brackets that secure the router to the shipping crate platform
5.
using a 9/16-in. (14 mm) socket wrench, and a number 2 Phillips screwdriver, and set
them aside.
201).
Figure 97 on page
Chapter 18: Installing the Router
"Unpacking the Router
225).
225