Related
Documentation
Installing the MX2020 Air Baffle
Copyright © 2015, Juniper Networks, Inc.
Figure 159: Installing Upper Fan Trays
Figure 160: Installing Lower Fan Trays
Preventing Electrostatic Discharge Damage to an MX2020 Router on page 558
Maintaining the MX2020 Fan Trays on page 345
Removing an MX2020 Fan Tray on page 472
To install the air baffle—MX2000-UPR-BAFFLE:
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Close the upper fan tray access door.
2.
Align the holes on the air baffle with the holes located on either side of the upper fan
3.
tray access door, (see
Figure 161 on page
Tighten the four captive screws to secure the air baffle to the upper fan tray access
4.
door.
Chapter 22: Installing and Replacing Components
314).
313