Rack-Mounting Requirements; Table 41: Mx2020 Shipping Weight Specifications - Juniper MX2020 Hardware Manual

3d universal edge router

Hide thumbs Also See for MX2020:

Table of Contents

Documentation

Rack-Mounting Requirements

MX2020 Rack Requirements on page 110

MX2020 Rack-Mounting Hardware on page 50

MX2020 Cabinet Size and Clearance Requirements on page 106

MX2020 Cabinet Airflow Requirements on page 105

You can install the router in a four-post rack or cabinet.

The shipping and installation site must be an ESD approved area.

The rack rails must be spaced wide enough to accommodate the router chassis's

external dimensions: 78.75 in. (200 cm) high, 36.20 in. (91.95 cm) deep, and

19 in. (48.3 cm) wide (see

A typical four-post rack measures 84 in. (213.4 cm) high,

24 in. (61 cm) to 30 in. (76.2 cm) deep, and 19 in. (48.3 cm) wide.

The dimensions also include the standard cable management

system and standard EMI covers.

The rack must be able to accommodate the additional depth of the extended cable

management system, 38.67 in. (98.2 cm) deep (see

The rack must be strong enough to support the weight of the fully configured router,

up to 1,500 lb (681.8 kg). See

specifications.

Shipping crate and pallet

Unpopulated MX2020

Unpopulated MX2020 with shipping crate and

Fully populated MX2020 with shipping crate

Chapter 10: Planning and Preparing the Site

Figure 61 on page

Table 36 on page 108

for MX2020 shipping weight

Shipping Weight

180 lb (81.8 kg)

300 lb (136.4 kg)

480 lb (218.2 kg)

1,680 lb (763.6 kg)

Figure 61 on page