Figure 157: Installing The Extended Emi Cover Mounting Brackets - Juniper MX2020 Hardware Manual

MX2020 3D Universal Edge Router Hardware Guide
310

Figure 157: Installing the Extended EMI Cover Mounting Brackets

0
Orient the cover so that the arrows point up in front of the card cage.
4.
Angle the cover so that the points each side of the extended EMI cover fit into the
5.
grooves on the EMI cover mounting brackets.
Tilt the extended EMI cover into place and press firmly until the sides contact the EMI
6.
cover mounting brackets:
The upper extended EMI cover tilts from the top.
The lower extended EMI cover tilts from the bottom.
Copyright © 2015, Juniper Networks, Inc.