Figure 81: Open Router Transport Kit Shipping Crate - Juniper MX2020 Hardware Manual

MX2020 3D Universal Edge Router Hardware Guide
202
To unpack the router transport kit:
Move the router transport kit shipping crate to an ESD-approved staging area, where
1.
you have enough room to remove the kit for assembly.
Position the shipping crate with the arrows pointing up.
2.
Remove the metal clips on the shipping crate that secure the top and front to the
3.
crate (see Figure 81 on page

Figure 81: Open Router Transport Kit Shipping Crate

Remove the top and front of the shipping crate, and set them aside.
4.
Remove the two wing nuts that secure the wooden brace to the shipping crate
5.
platform, and set them aside.
Align the crate door with the shipping crate platform, and secure the door to the
6.
platform by using the attached velcro straps (see
202).
Figure 82 on page
Copyright © 2015, Juniper Networks, Inc.
203).