MX2020 3D Universal Edge Router Hardware Guide
288
Figure 144: USB Flash Drive Port on CB-RE
0
Gather the following information before configuring the router:
Name the router will use on the network
Domain name the router will use
IP address and prefix length information for the Ethernet interface
IP address of a default router
IP address of a DNS server
Password for the root user
This procedure connects the router to the network but does not enable it to forward
traffic. For complete information about enabling the router to forward traffic, including
examples, see the Junos OS configuration guides.
To configure the software:
Verify that the router is powered on.
1.
Log in as the "root" user. There is no password.
2.
Start the CLI.
3.
root# cli
root@>
19
Copyright © 2015, Juniper Networks, Inc.