Installing The Router; Rack; Removing The Power Distribution Modules Before Installing An Mx2020; Router - Juniper MX2020 Hardware Manual

CHAPTER 18

Installing the Router

Removing Components from the MX2020 Router Chassis Before Installing It In a Rack
Copyright © 2015, Juniper Networks, Inc.
Removing Components from the MX2020 Router Chassis Before Installing It In a
Rack on page 209
Installing a MX2020 Router Using a Pallet Jack Overview on page 219
Installing the Pallet Jack Attachment on page 219
Installing the MX2020 Router Using a Pallet Jack with Attachment on page 220
Installing a MX2020 Router Using a Router Transport Kit Overview on page 224
Installing the Router Transport Kit on the MX2020 Router on page 224
Securing the MX2020 Router to the Router Transport Platform on page 226
Installing the MX2020 Router Using a Router Transport Kit on page 229
Reinstalling Components in the MX2020 Chassis After Installing It In a Rack on page 236
Before installing the router with a router transport kit, you must first remove shipping
covers and components from the chassis. With components removed, the chassis weighs
approximately 429.6 lb (194.86 kg).
CAUTION: The shipping covers help guide the chassis into the rack. Applying
force to any other part of the chassis can cause damage.
1.

Removing the Power Distribution Modules Before Installing an MX2020

Router on page 210
2. Removing the Power Supply Modules Before Installing an MX2020 Router on page 211
Removing the Fan Trays Before Installing an MX2020 Router on page 213
3.
Removing the SFBs Before Installing an MX2020 Router on page 214
4.
Removing the MPCs with Adapter Card Before Installing an MX2020 Router on page 216
5.
Removing the MPCs without an Adapter Card Before Installing an MX2020
6.
Router on page 216
Removing the CB-REs Before Installing the MX2020 Router on page 217
7.
209