Replacing The Mx2020 Extended Cable Managers; Removing The Mx2020 Upper Extended Cable Manager; Figure 196: Installing The Standard Dc Cable Manager - Juniper MX2020 Hardware Manual

Related
Documentation

Replacing the MX2020 Extended Cable Managers

Removing the MX2020 Upper Extended Cable Manager

Copyright © 2015, Juniper Networks, Inc.

Figure 196: Installing the Standard DC Cable Manager

D
Preventing Electrostatic Discharge Damage to an MX2020 Router on page 558
MX2020 Cable Manager Description on page 45
Replacing the MX2020 Extended Cable Managers on page 443
Removing the MX2020 Upper Extended Cable Manager on page 443
Removing the MX2020 Lower Extended Cable Manager on page 444
Removing the MX2020 Extended DC Cable Manager on page 445
Installing the MX2020 Upper Extended Cable Manager on page 446
Installing the Lower MX2020 Extended Cable Manager on page 447
Installing the MX2020 Extended DC Cable Manager on page 448
To remove the upper MX2020 extended cable manager:
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Remove the extended craft interface as described in Removing the MX2020 Extended
2.
Craft Interface.
To remove the cover, loosen the two captive screws on the extended cable manager
3.
cover. Set the extended cable manager cover aside.
Remove the eight screws that secure the extended cable manager to the chassis as
4.
shown in Figure 197 on page
Pull the extended cable manager away from the chassis.
5.
444.
Chapter 25: Replacing Components
443