Installing The Mx2020 Air Baffle; Figure 224: Removing The Air Baffle; Figure 225: Installing The Air Baffle - Juniper MX2020 Hardware Manual

MX2020 3D Universal Edge Router Hardware Guide

Installing the MX2020 Air Baffle

Related
Documentation
476

Figure 224: Removing the Air Baffle

To install the air baffle—MX2000-UPR-BAFFLE:
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Close the upper fan tray access door.
2.
Align the holes on the air baffle with the holes located on either side of the upper fan
3.
tray access door, (see Figure 161 on page
Tighten the four captive screws to secure the air baffle to the upper fan tray access
4.
door.

Figure 225: Installing the Air Baffle

Preventing Electrostatic Discharge Damage to an MX2020 Router on page 558
MX2020 Cooling System Description on page 53
Maintaining the MX2020 Air Baffle on page 344
314).
Copyright © 2015, Juniper Networks, Inc.