Verifying The Mx2020 Parts Received; Table 74: Parts List For A Fully Configured Mx2020 Router - Juniper MX2020 Hardware Manual

Verifying the MX2020 Parts Received

Copyright © 2015, Juniper Networks, Inc.
Installing the MX2020 Router Using a Pallet Jack with Attachment on page 220
Installing the MX2020 Router Using a Router Transport Kit on page 229
A packing list is included in each shipment. Check the parts in the shipment against the
items on the packing list. The packing list specifies the part numbers and descriptions of
each part in your order.
If any part is missing, contact a customer service representative.
A fully configured router contains the router chassis with installed components, listed in
Table 74 on page 199, and an accessory box, which contains the parts listed in
Table 75 on page 200. The parts shipped with your router can vary depending on the
configuration you ordered.

Table 74: Parts List for a Fully Configured MX2020 Router

Component
Chassis, including backplane, and craft interface.
Standard EMI covers
Extended EMI covers (optional)
Large mounting shelf
MPCs
ADCs
MICs
SFBs
Combed Control Board with Routing Engines (CB-REs)
Power distribution modules (PDMs)
Power supply modules (PSMs)
Fan trays
Air baffle (optional)
PSM air filter
Air filter (lower)
Chapter 16: Unpacking the Router
Quantity
1
2
2
1
Up to 20
Up to 20
Up to 40
Up to 8
1 or 2
Up to 4
Up to 18
4
1
2
1
199