Figure 105: Attaching Winch Strap To Winch Strap Plate - Juniper MX2020 Hardware Manual

3d universal edge router

Hide thumbs Also See for MX2020:

Table of Contents

MX2020 3D Universal Edge Router Hardware Guide

Figure 105: Attaching Winch Strap to Winch Strap Plate

Attach a 1-1/8 in. (28.57 mm) socket drive wrench to the winch mechanism and turn

clockwise to start pulling the chassis into the rack onto the mounting shelf until the

front-mounting flanges contact the rack rails. Ensure that the holes in the

front-mounting flanges of the chassis align with the holes in the rack rails (see

Figure 106 on page