Connecting The Router To Power; Grounding The Mx2020 Router - Juniper MX2020 Hardware Manual

3d universal edge router

Hide thumbs Also See for MX2020:

Table of Contents

Connecting the Router to Power

Grounding the MX2020 Router on page 247

Connecting AC Power to an MX2020 Router with Three-Phase Delta AC Power

Distribution Modules on page 249

Connecting AC Power to an MX2020 Router with Three-Phase Wye AC Power

Distribution Modules on page 252

Mapping Input Power from AC Power Distribution Modules to AC Power Supply Modules

on the MX2020 Router on page 256

Installing MX2020 AC Power Supply Modules on page 258

Powering On the AC-Powered MX2020 Router on page 260

Connecting Power to a DC-Powered MX2020 Router with Power Distribution

Modules on page 262

Installing MX2020 DC Power Supply Modules on page 265

Connecting an MX2020 DC Power Distribution Module Cable on page 268

Connect Power to a Single-Phase Seven-Feed AC Power Distribution Module on page 270

Connect Power to a Seven-Feed DC Power Distribution Module on page 271

Powering On the DC-Powered MX2020 Router on page 273

To ground the router, you need the following tools:

Phillips (+) screwdriver, number 2

ESD grounding wrist strap

Two UNC 1/4–20 nuts and washers

Grounding lug, 4-AWG for 80-A input or 6-AWG for 60-A input

Grounding cable, minimum 10 AWG wire (not provided)