Supported Network Interface Standards By Transceiver For Acx, M, Mx, And T; Series Routers - Juniper MX2020 Hardware Manual
3d universal edge router
Hide thumbs
Also See for MX2020:
- Hardware manual (454 pages) ,
- Hardware manual (800 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
Related
Documentation
Supported Network Interface Standards by Transceiver for ACX, M, MX, and T Series
Routers
Copyright © 2015, Juniper Networks, Inc.
transceivers, see
"Supported Network Interface Standards by Transceiver for ACX, M,
MX, and T Series Routers" on page
cables are supported in a particular device, see the "Cables and connectors" section in
the PIC guide or the
MX Series Interface Module Reference
For transceiver and cable specifications, see:
Ethernet 10BASE-T Copper Interface Specifications
Fast Ethernet 100BASE-T Copper Interface Specifications
Gigabit Ethernet 1000BASE-T Copper Interface Specifications
Fast Ethernet 100BASE-FX Optical Interface Specifications
Fast Ethernet and Gigabit Ethernet Bidirectional SFP Optical Interface Specifications
Gigabit Ethernet 1000BASE Optical Interface Specifications
10-Gigabit Ethernet 10GBASE Optical Interface Specifications
40-Gigabit Ethernet 40GBASE-R Optical Interface Specifications
100-Gigabit Ethernet 100GBASE-R Optical Interface Specifications
SONET/SDH OC3/STM1 Optical Interface Specifications
SONET/SDH OC12/STM4 Optical Interface Specifications
SONET/SDH OC48/STM16 Optical Interface Specifications
SONET/SDH OC192/STM64 Optical Interface Specifications
Understanding Fiber-Optic Cable Signal Loss, Attenuation, and Dispersion on page 127
Calculating Power Budget and Power Margin for Fiber-Optic Cables on page 128
Table 45 on page 136
and
Table 46 on page 141
MX, and T Series devices.
NOTE:
Not all transceivers are supported on all devices. To determine which
transceivers are supported in a particular device, see the "Cables and
Connectors" section for each PIC, MIC, or line card in the Interface Module
Reference for your device.
Table 45 on page 136
lists the supported Ethernet standards for each transceiver.
Table 46 on page 141
lists the supported SONET standards for each transceiver.
Some transceivers support monitoring by using the operational mode CLI command
show interfaces diagnostics optics
refer to the "Monitoring Available" column in
Chapter 11: Transceiver and Cable Specifications
135. To determine which transceivers and network
.
list the transceivers supported by ACX, M,
. To determine which transceivers support monitoring,
Table 45 on page 136
and
Table 46 on page
141.
135
Advertisement
Table of Contents
Troubleshooting
