Tools and Parts Required to Maintain the MX2020 Hardware Components
Related
Documentation
Tools and Parts Required for MX2020 Router Connections
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
Connecting Power to a DC-Powered MX2020 Router with Power Distribution Modules
on page 262
To maintain hardware components, you need the following tools and parts:
ESD grounding wrist strap
Flat-blade (–) screwdriver
Phillips (+) screwdriver, number 1 and number 2
Routine Maintenance Procedures for the MX2020 Router on page 407
Maintaining the MX2020 Host Subsystem on page 370
Maintaining the MX2020 Power Supply Modules on page 386
To connect the router to management devices and MPCs, you need the following tools
and parts:
Phillips (+) screwdrivers, numbers 1 and 2
2.5-mm flat-blade (–) screwdriver
2.5-mm Phillips (+) screwdriver
Wire cutters
Electrostatic discharge (ESD) grounding wrist strap
Connecting the MX2020 Router to a Network for Out-of-Band Management on page 275
Connecting the MX2020 Router to a Console or Auxiliary Device on page 276
Connecting an MX2020 Router to an External Alarm-Reporting Device on page 277
Chapter 15: Installation Overview
193