Packing An Acx5000 Router Components For Shipping - Juniper ACX5048 Hardware Manual

4. Have one person support the weight of the router while another person unscrews and removes the
mounting screws.
5. Remove the router from the rack or cabinet (see
and place the router in an antistatic bag.
6. Place the router in the shipping carton.
7. Place the packing foam on top of and around the router.
8. If you are returning accessories or FRUs with the router, pack them as instructed in
Router Components for Shipping" on page
9. Replace the accessory box on top of the packing foam.
10. Close the top of the cardboard shipping box and seal it with packing tape.
11. Write the RMA number on the exterior of the box to ensure proper tracking.

Packing an ACX5000 Router Components for Shipping

CAUTION:
boxes if they do not fit together on one level in the shipping box.
To pack and ship ACX5000 router components:
Place individual FRUs in antistatic bags.
Ensure that the components are adequately protected with packing materials and packed so that the
pieces are prevented from moving around inside the carton.
Close the top of the cardboard shipping box and seal it with packing tape.
Write the RMA number on the exterior of the box to ensure proper tracking.
"Chassis and Component Lifting Guidelines" on page
155.
Do not stack router components. Return individual components in separate
165)
"Packing an ACX5000
155