Unpacking The Mx480; Tools And Parts Required To Unpack The Mx480 Router; Unpacking The Mx480 Router - Juniper MX480 Hardware Manual

See "Initially Configuring the MX480 Router" on page

Unpacking the MX480

IN THIS SECTION

Tools and Parts Required to Unpack the MX480 Router | 216

Unpacking the MX480 Router | 216

Verifying the MX480 Router Parts Received | 218
Tools and Parts Required to Unpack the MX480 Router
To unpack the router and prepare for installation, you need the following tools:
Phillips (+) screwdriver, number 2
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping pallet
Blank panels to cover any slots not occupied by a component
Unpacking the MX480 Router
The router is shipped in a wooden crate. A wooden pallet forms the base of the crate. The router chassis
is bolted to this pallet. Quick Start installation instructions and a cardboard accessory box are also included
in the shipping crate.
The shipping container measures 21 in. (53.3 cm) high, 23.5 in. (60.0 cm) wide, and 32.5 in. (82.5 cm) deep.
The total weight of the container containing the router and accessories can range from 93 lb (42.2 kg) to
169 lb (76.7 kg).
NOTE: The router is maximally protected inside the shipping crate. Do not unpack it until you
are ready to begin installation.
271.
216