Adjusting The Key, Choke, And Link Parameters For Multiple Sounds - Native Instruments MASCHINE MK3 Manual

5.2

Adjusting the Key, Choke, and Link Parameters for Multiple Sounds

In the software, if you select multiple Sounds with different Key,
corresponding parameters in Pad view now display MULTI. On your controller in Pad Mode, the
corresponding parameters now display (MULTI).
Moreover, you can adjust these parameters for the selected Sounds as described below.
For general information on the Pad view of the software, the Pad Mode on your control-
ler, and the Key, Choke, and
Your Pads" in the MASCHINE 2.0 Manual.
Adjusting the Key Parameter for Multiple Sounds with different Key Values
Click and drag the
►
Sounds. While dragging, the field displays a
will apply to all Sounds as you release the mouse button.
Sound slots 1 to 4 are selected. If they have different Key values, a MULTI label appears (left). When you drag it (middle), a
transpose value appears (right) that will be applied to all selected Sounds when you will release the mouse button.
This is also true when adjusting the parameter from your controller.
Link parameters, please refer to section 5.1 "Adjusting
MULTI label next to Key
Adjusting the Key, Choke, and Link Parameters for Multiple Sounds
Choke and/or
to transpose the base key of all selected
+/-x value indicating the transposition that
Playing on the Controller
Link values, the
MASCHINE - Manual - 238