5.
Turn Knob 1 to set the
Now the external audio is routed to your Sound! You can adjust the level of the incoming
→
signal by turning Knob 2 (GAIN).
Method 2: Using the Navigate Page
1.
Press Button 5 repeatedly until the Input properties are selected (you should see
at the top left of the right display, under Button 5/6).
2.
Press
SHIFT
+
NAVIGATE
the Page Left button until it turns off, since the
properties.
You will now see two parameters at the bottom of the left display:
the source) and
GAIN
3.
Turn Knob 1 to set the
SOURCE
to
Ext.
1.
+ pad 1 to select the
(which adjusts the level of the input).
SOURCE
to
Ext.
1.
Audio
Parameter page. You can also press
Audio
page is the first page of the Input
SOURCE
Using Effects
Applying Effects to External Audio
INPUT
(which selects
MASCHINE - Manual - 645