Native Instruments MASCHINE MK3 Manual page 693

Parameter
MAIN Section
Frequency
Feedback
8Pole
MOD Section
Amount
Source
Speed (LFO)
Speed (LFO Sync)
Shape (Envelope)
Stereo
OUTPUT Section
Mix
Description
This defines the center frequency of the Phaser.
Adjusts the amount of output signal fed back into the input.
Activating this causes the Phaser to use the 8Pole mode,
resulting in a more intense phasing effect.
This defines how much the Phaser gets modulated by the
modulation source.
Here you can select the modulation source of the Phaser:
available options are LFO, LFO Sync, and Envelope. Depending
on your selection, the parameter to the right will change.
Defines the speed of the LFO in a range from 0.03 Hz up to
8 Hz.
Defines the speed of the LFO in note values from 16/1 (one
cycle every 16 bars) up to 1/16 note.
Change the shape of the envelope here.
This parameter widens the stereo field of the effect.
Mix lets you adjust the amount of the effect in relation to the
dry original audio signal.
Effect Reference
Modulation Effects
MASCHINE - Manual - 693