Native Instruments MASCHINE MK3 Manual page 580

Hide thumbs Also See for MASCHINE MK3:

Table of Contents

Configuring MIDI Output for Sounds in Mix View

You can also easily configure the MIDI output of your Sounds in MASCHINE's Mixer:

Click the Mix View button on the left of the Arranger to switch from Arrange view to Mix

Open the extended view of the Mixer by clicking the down-pointing arrow on the left of the

Check that the

and display the input/output settings of each channel strip.

Selects the MIDI channel on which the Sound will send MIDI data.

By default Sound slot 1 will send MIDI data on channel 1, Sound

slot 2 on channel 2, etc.

Applies an offset to the MIDI note numbers before the notes are

sent. Values range from -48 (downward transposition by 48

semitones, i.e. four octaves) to +48 (upward transposition by 48

semitones, i.e. four octaves). The default value is 0.

button is active on the left of the Mixer — if not, click it to enable it

Audio Routing, Remote Control, and Macro Controls

Using MIDI Control and Host Automation

MASCHINE - Manual - 580

Show Quick Links

Table of Contents