Native Instruments MASCHINE MK3 Manual page 46

If the desired Sound does not appear in the Sound List, use the scroll bar at the right
end of the Pattern Editor or turn your mouse wheel while hovering the Pattern Editor to
display any hidden Sounds.
You can also select multiple Sounds at once to apply changes to all of them. See sec-
tion ↑4.1.3, Selecting Multiple Sounds or Groups
Focusing on a Group using the Hardware
1. If necessary, press
containing the desired Group.
2. Press the desired Group button A–H.
The corresponding Group is now in focus.
→
Once the Group is focused you can use Button 1–3 above the left display to quickly
switch between the Master, the focused Group and the last focused Sound in that
Group! See section
more information.
Setting the Focus on a Sound using the Hardware
1. If you want to set the focus on a Sound located in another Group, first set the focus on its
Group as described above.
2. Press SELECT + the pad of the desired Sound (or simply press its pad if pads are in
Group mode).
The corresponding Sound is now in focus.
→
Once the Sound is focused you can use Button 1–3 above the left display to quickly switch
between the Master, the containing Group and the focused Sound! See section
ing Between the Master, Group, and Sound Level
You can also select multiple Sounds at once to apply changes to all of them. See sec-
tion ↑4.1.3, Selecting Multiple Sounds or Groups
SHIFT + the desired Group button
↑2.3.8, Switching Between the Master, Group, and Sound Level
for more information.
A–H to switch to the Group bank
for more information.
for more information.
Basic Concepts
Common Operations
for
↑2.3.8, Switch-
MASCHINE - Manual - 46