Step 2: Route Audio To The Send Effect - Native Instruments MASCHINE MK3 Manual

13.3.2

Step 2: Route Audio to the Send Effect

Once you have configured a Sound or Group as send effect (see
Sound or Group as Send
that Sound or Group. For this purpose, each Sound and each Group is equipped with an addi-
tional two auxiliary outputs available in its Output properties.
Here we describe the procedure in Arrange view. You can also do this in Mix view — see
section ↑11.1.2, Configuring the Main Output of Sounds and
You can repeat the process to route more Sounds/Groups to the same send effect, or route the
same Sound/Group to an additional send effect send using
Routing Audio to the Send Effect on the Controller
1. Press the CHANNEL
2. If you want to route a Group's output to the send effect, press Button 2 to select the
GROUP tab, if necessary press
containing the Group, and press the Group button
Group.
3. If you want to route a Sound's output to the send effect, press Button 3 to select the
SOUND tab, select the Group containing that Sound as described in the previous step,
and press SELECT
mode).
Effect), you can send the output of any other Sounds and Groups to
button to enter Control mode and display the Channel properties.
SHIFT + the Group button
+ the pad of that Sound (or simply press its pad if pads are in Group
↑13.3.1, Step 1: Set Up a
Groups.
AUX 2.
A–H corresponding to the bank
A–H corresponding to the desired
MASCHINE - Manual - 653
Using Effects
Creating a Send Effect