Native Instruments MASCHINE MK3 Manual page 851

Hide thumbs Also See for MASCHINE MK3:

Table of Contents

Page / Parameter

Select the Slicer edit mode.

The Sample Slicer Manual mode Auto-Snap feature automatically

aligns Slice points to the nearest transient as you manually trigger

the slicing from the pads. It can be turned off so that slice points are

instead placed exactly where you trigger them. In order to use Auto-

Snap, you must wait for analysis to be performed on the sample

you're slicing—the analysis is very quick but will take longer for long

audio files.

Selects the Slice to edit. The display will show you which Slice is

currently selected. You can also use the pads to select Slices starting

Adjusts the start point of the selected Slice. Hold

turning the Knob to adjust the parameter in finer increments. If the

start point of the Slice and the end point of the previous Slice are

still joined, moving the start point of the Slice simultaneously moves

the end point of the previous Slice, so that both Slices stay joined.

Adjusts the end point of the selected Slice. Hold

the Knob to adjust the parameter in finer increments. Note that

moving the end point of a Slice does not simultaneously move the

start point of the next Slice — in opposition to adjusting the

parameter (see above).

The Sample Slicer Mono option when activated automatically sets

the Voice and Choke Group of all sample slices to 1 when slicing to a

This time saving feature is useful when you don't want to have lots of

samples triggered or repeating at the same time, for example, when

you slice a drum loop and trigger the individual hits to form a new

Sampling and Sample Mapping

Slicing a Sample

when turning

MASCHINE - Manual - 851

Show Quick Links

Table of Contents