A Few Notes On Send Effects - Native Instruments MASCHINE MK3 Manual

and number followed by the Sound number (in the example underneath we selected the
entry A1:S1-1 for the
7. Use Knob 2 (Aux 1
The signal of each auxiliary output is taken by default after the main output level control
has been applied. This can be changed via Knob 3
tion, please see section
You can repeat the process to route more Sounds/Groups to the same send effect, or route the
same Sound/Group to another send effect send using
13.3.3

A Few Notes on Send Effects

When working with send effects, please keep in mind the following:
▪ You cannot send the Master output to send effects.
▪ You cannot send a send effect's output to itself, nor the output of a Group to one of its own
Sounds.
However, you can:
▪ Chain several Sounds configured as send effects by sending the output of a send effect in-
to another send effect using the method described above (see
dio to the Send Effect).
▪ Use the Effect Plug-ins loaded in a Group to simultaneously process its own Sounds and
other Sounds/Groups sent to it.
This opens up virtually endless routing possibilities!
Aux 1 output).
LEVEL) to adjust the level of the signal sent to that auxiliary output.
↑11.1.3, Setting Up Auxiliary Outputs for Sounds and
(Aux 1 ORDER). For more informa-
Groups.
Aux 2.
↑13.3.2, Step 2: Route Au-
Using Effects
Creating a Send Effect
MASCHINE - Manual - 655