2.
Press Button 4 (STEP) to access the Step and Nudge Grid settings.
The right display will show you which pad represents a resolution:
3.
Select a step size by pressing the corresponding pad. Alternatively you can repeatedly
press Button 5–8 to successively select each of the resolutions in the corresponding col-
umn.
The selected value is highlighted on the right display and the corresponding pad turns
→
fully lit.
To disable the Step Grid, simply select the
To disable the Step Grid, hold
►
press pad
16
(OFF).
You don't need to explicitly enable the Step Grid on your controller: It is enabled as
soon as you select a step size other than
Adjusting the Nudge Grid
To change the Nudge Grid resolution:
1.
Hold
SHIFT
+
FOLLOW
2.
Press Button 4 (STEP) to access the Step and Nudge Grid settings.
3.
Turn Knob 4 (NUDGE) to select the desired Nudge Grid resolution.
The new Nudge Grid resolution is directly in use, provided that the Step Grid is enabled
→
(see above).
OFF
value in the top right corner:
SHIFT
+
FOLLOW
OFF
(pad 16).
(Grid) to enter Grid mode.
(Grid), press Button 4 (STEP), then
MASCHINE - Manual - 446
Working with Patterns
Pattern Basics