Audio Editing Functions - Native Instruments MASCHINE MK3 Manual

Hold SHIFT when turning the Knobs to adjust the parameters in finer increments.
On the right display, the selection range is highlighted.
Changing the play range automatically resets the selection range to the new play range.
Audio Editing
The EDIT page provides several audio editing functions to process your Sample. Available via
Button 5–8 above the right display, these functions are described in detail in the next section
↑16.3.2, Audio Editing
16.3.2

Audio Editing Functions

In the Edit page, the Audio Toolbar provides various audio functions. These will be performed
on the selected region of the Sample, as defined by the
LECTION RANGE section (see
To apply any audio function to the selected region in your Sample, click the desired icon
►
in the Audio Toolbar.
These audio editing functions are destructive, i.e. they modify the audio material in the
Sample. However, your original Sample will not be modified: For each audio function
that you perform, a new, distinct copy of the Sample will be saved!
The playback settings of the Sample (e.g., tune, amplitude envelope, etc.) can be ad-
justed on the Zone
View for more information.
The Audio Toolbar.
The Audio Toolbar provides following audio processing functions:
Functions.
↑16.3.1, Using the Edit Page
page. See section ↑16.5.4, Selecting and Editing Zones in the Map
Sampling and Sample Mapping
Start and End parameters of the
above).
MASCHINE - Manual - 829
Editing a Sample
SE-