Navigating Your Channels In Mix Mode - Native Instruments MASCHINE MK3 Manual

Hide thumbs Also See for MASCHINE MK3:

Table of Contents

When Mix mode is active, the

In Mix mode the displays show channel strips for your Sounds and Groups:

Navigating Your Channels in Mix Mode

Like the Mixer in the software, the Mix mode lets you choose to display channel strips at the

Group level (i.e. all your Groups) or at the Sound level (i.e. all Sound slots of the Group current-

ly focused).

At both levels channels are organized into groups of eight channels (four on each display).

Use the Page buttons at the left of the displays to show the next/previous eight channels

and 9–16; Groups: A1–H1, A2–H2, etc.).

Setting the Focus on a Channel (Sound or Group)

To put the focus on any of the displayed channels (Sounds or Groups), press the But-

ton 1–8 above the desired strip in the displays.

The focused channel is highlighted.

Alternatively you can focus Groups and Sounds by pressing the Group buttons and the pads as

in Control mode. If you set the focus to a Sound or Group not visible on the displays, these

automatically switch to the relevant set of eight channels: for example if you are viewing Sound

and press pad 11, the displays automatically jump to Sound channels

order to show the Sound slot

The focus is strictly equivalent in Mix mode and in Control mode: The Sound or Group

focused in Mix mode will also be focused in Control mode, and inversely.

Mix Mode – Displaying the Group Level

To display Group channels, push the 4-D encoder upwards.

The channel strips on the displays represent the Groups of your Project. At the top of the dis-

plays you see the headers of all your Groups. The focused channel is highlighted.

button is lit.

you just selected.

Controlling Your Mix

Controlling Your Mix from the Controller

MASCHINE - Manual - 624

Show Quick Links

Table of Contents