Native Instruments MASCHINE MK3 Manual page 642

If you are using MASCHINE as a plug-in in a host application, MASCHINE can receive
audio from your host on any of its eight mono virtual inputs. To know how to route audio
in your host to the virtual inputs of the MASCHINE plug-in, please refer to your host
documentation. When this is done, go directly to section
Sound to Receive the External
MASCHINE in Stand-Alone Mode
Please make sure that you have connected an external audio signal source to your audio inter-
face and that the inputs of the audio interface are activated. To do this:
1. Select the Preferences... entry from the
2. In the Audio page click the
in the Port column and selecting a physical input from the drop-down menu, then click
Close.
Audio signals coming from external sources plugged in the inputs selected here will now
→
be routed to the MASCHINE inputs shown in the first column.
Input.
File menu to open the
Input button, activate the desired inputs by clicking their field
Applying Effects to External Audio
↑13.2.2, Step 2: Set up a
Preferences panel.
MASCHINE - Manual - 642
Using Effects