Editing Zones In The Sample View - Native Instruments MASCHINE MK3 Manual

For more information on the
a Sample and ↑16.4, Slicing a
Sample Map Menu
The Sample Map menu contains additional editing facilities.
Right-click ([Ctrl]-click on macOS) a Zone to open the Sample Map menu.
►
The commands in the Sample Map menu will affect all selected Zones. The menu provides fol-
lowing commands:
Command
Delete
Map as Drum Kit
16.5.5

Editing Zones in the Sample View

{Commented by Christian Schulz, 09.09.2016 15:03:21: This needs a rework as it is really
shit}
The Sample view is visible when the Sample View button (showing a little waveform icon at the
right of the Zone tab) is enabled.
Enable the Sample View button to see the Sample view.
The Sample view contains following elements:
Edit and Slice pages, please refer to section
Sample, respectively.
Description
Removes the selected Zone(s) from the Sample Map.
Reduces the selected Zones to one note over the full velocity range
and puts the Zones next to each other upwards from the middle C
(C3). The actual note assigned to each Zone depends on the Zone
position in the Zone List: The topmost Zone will be mapped to
middle C (C3), the Zone underneath to C#3, etc.
Sampling and Sample Mapping
Mapping Samples to Zones
↑16.3, Editing
MASCHINE - Manual - 871