Modulation Mode - Native Instruments MASCHINE MK3 Manual

Hide thumbs Also See for MASCHINE MK3:

Table of Contents

In Pitch mode, the scale on the Smart Strip is centered, as indicated by a white LED in the

middle of the Smart Strip. Sliding your finger to the left will flatten the pitch. Sliding your fin-

ger to the right will sharpen the pitch. The amount of pitch bend applied to the Sound is indi-

cated by the LED dots above the Smart Strip. Once you lift your finger off the Smart Strip, the

pitch of the sound will return to standard tuning.

To enable Pitch mode, press the

Modulation Mode

In Modulation mode, sliding your finger on the Smart Strip modulates the sound of the notes

you play on the pads. The Smart Strip always controls the parameter that is assigned to the

standard MIDI CC #1. This MIDI Continuous Controller is reserved for the modulation wheel. If

you have used the modulation wheel on a synthesizer or standard MIDI keyboard before, you

are probably familiar with the effect.

In Modulation mode, the scale starts at the left side of the Smart Strip, as indicated by a white

LED. Sliding your finger to the right will apply an increasing amount of modulation, as indicat-

ed by the LED dots above the Smart Strip. When you lift your finger off the Smart Strip, the

modulation value will remain at the position where the strip was last touched; the LED dots

above remain lit to indicate this position.

To enable Modulation mode, press the

Perform Mode

In Perform mode, the Smart Strip controls a parameter of one of the Perform effects (Per-

form FX) described in

↑14.7, Perform

ped to the parameter that makes most sense to control in real time.

To control a Perform FX using the Smart Strip:

Select the Group (A-H) you want to apply the effect to.

Open the Perform FX page on the controller by pressing

Select a Perform FX mode from the

knob when the effect you want to use is highlighted in the list.

FX. For each of the Perform FX, the Smart Strip is map-

menu by turning Knob 1, and letting go of the

Playing on the Controller

Using the Smart Strip

MASCHINE - Manual - 275

Show Quick Links

Table of Contents