Native Instruments MASCHINE MK3 Manual page 844

Parameter
BPM (BPM Mode)
ADJUST
When MODE is set to DETECT, a second section of parameters is available at the bottom of the
left display: the ENGINE
When MODE is set to DETECT, press the Right Page button to show the
►
The ENGINE section.
This ENGINE section contains a single parameter: ZERO-X.
Parameter
ENGINE Section
ZERO-X (Zero
Crossing, Detect mode
only)
Description
Selects how the tempo is defined: If you select AUTO, MASCHINE
will calculate the tempo automatically. If you select MANUAL, you
can enter the tempo in BPM manually.
If BPM is set to AUTO, you can choose between the tempo that
MASCHINE detected, or half or double of that tempo. If
to MANUAL, you can adjust the tempo manually.
section.
Description
(Detect mode only)
When MODE is set to DETECT, activate
Slices to be created on the closest locations where the audio signal
crosses the zero value. This can be helpful to avoid clicks when
playing back Slices in another sequence.
Sampling and Sample Mapping
BPM is set
ENGINE section.
ZERO-X to force the detected
MASCHINE - Manual - 844
Slicing a Sample