Setting
Outputs
Adjusting MIDI Preferences Using the Controller
You can access the MIDI preferences directly from the controller. The options found here are a
replica of those found in the software.
To access the MIDI preferences from your controller:
1.
Press
SETTINGS
to display the Settings page.
2.
Press Button 3 (MIDI) to access the hardware settings.
▪ Turn Knob 1 (MODE) to adjust the MIDI Sync mode preference.
▪ Turn Knob 2
(CLOCK
▪ Turn Knob 5 (SELECT) to select a MIDI Input Device.
▪ Turn Knob 6 (STATUS) to enable or disable a MIDI Input Device.
▪ Turn Knob 7 (SELECT) to select a MIDI Output Device.
▪ Turn Knob 8 (STATUS) to enable or disable a MIDI Output Device.
To save your settings and return to MASCHINE mode, press SETTINGS.
►
If you want MASCHINE to send other MIDI messages than MIDI Clock, in particular if
you want to control other MIDI-capable devices via the notes played in MASCHINE,
please refer to section
2.6.4
Preferences – Default Page
The
Default
page allows you to define the default settings that will be used for each new
Project.
To display the
Default
►
Description
Click
Output
to display a list of all the available MIDI outputs of
your system. You can activate/deactivate each output by clicking
the fields in the
Status
the corresponding port.
OFFSET) to adjust the Clock Offset.
↑11.2.5, Sending MIDI from
page, click the
Default
column, which displays the current status of
Sounds.
tab on the left of the
Preferences
Basic Concepts
Preferences
panel.
MASCHINE - Manual - 78