Native Instruments MASCHINE MK3 Manual page 458

Hide thumbs Also See for MASCHINE MK3:

Table of Contents

Editing Tool

Knob 3 (VELOCITY)

Knob 4 (LENGTH)

Quick Edit Shortcuts for the Selected Steps

You can also quickly adjust the velocity, pitch, and position of any events via the Quick Edit

Press and hold the pad(s) of the step(s) you want to edit.

To adjust the events' velocity, press the

The adjusted value appears on the left display.

To finely adjust the events' position,

The adjusted value appears on the left display.

To adjust the events' pitch, press

The adjusted value appears on the left display.

When you are done, release the pad(s).

The event position will be adjusted independently of the current Step Grid: It is de-

signed as a fine adjustment within the current step.

Adjusts the velocity of the selected events. If the events have different

velocities, the velocities differences are retained as long as the limits

(0 and 127) are not reached. When only one event is selected, its

velocity is shown under VELOCITY. If several events are selected, the

field shows (MULTI).

Moves the end of the selected events according to the Step Grid (the

offset of each events' end relative to the Step Grid is preserved). Hold

while you turn the knob to temporarily override the Step Grid

quantization and adjust the lengths in extremely small increments. If

the events have different lengths, the length differences are retained

as long as no event becomes shorter than one step.

When only one event is selected, its length is shown under LENGTH. If

several events are selected, the field shows (MULTI).

(Velocity) button and turn the 4-D en-

(Position) button and turn the 4-D encoder.

(Tune) button and turn the 4-D encoder.

Working with Patterns

Recording Patterns with the Step Sequencer

MASCHINE - Manual - 458

Show Quick Links

Table of Contents