Native Instruments MASCHINE MK3 Manual page 669

The Transient Master in the Control area.
Parameter
DEPTH Section
Input Gain
Attack
Sustain
Limit
Description
Adjusts the level of the input signal. This allows you to offset the
overall level once you have set the desired effect, in order to
counterbalance the gain or loss of level that might occur.
Sharpens/softens the attack phases in your signal. With the knob at
the middle position, the attack phases are not altered. From this
position, turning the Attack
phases, while turning it to the right sharpens them.
Prolongs/shortens the sustain phases in your signal. With the knob
at the middle position, the sustain phases are not altered. From this
position, turning the Sustain
phases, while turning it to the right prolongs them.
Activates a hard limiter at the output, preventing the output signal
from clipping. This can be useful when the
high value as this may produce amplified attack phases which
become too loud.
knob to the left softens the attack
knob to the left shortens the sustain
Attack knob is set to a
Effect Reference
Dynamics
MASCHINE - Manual - 669