Native Instruments MASCHINE MK3 Manual page 309

Envelope Controls
Decay
Sustain
Release
DESTINATION
This is where you define modulation targets for the modulation envelope, i.e. the parameters
you want this envelope to control. The knobs adjust the amount of modulation for the following
targets:
Parameter
Pitch
Cutoff
Drive
Pan
Description
With Decay you adjust how fast the envelope drops to the sustain
level in ADSR mode; in AHD mode it is used to adjust how fast the
envelope fades out.
The envelope level that will be maintained as long as the note is
played.
The time for the sustain level to return to zero after the note has
ended.
Modulation Destination
Tune parameter of the PITCH / GATE
page (page 2).
Cutoff parameter of the
BP2 only) on the FX / Filter
Drive parameter of the FX
Pan parameter on the Audio
(see ↑11.1.2, Configuring the Main Output of Sounds and Groups
more information).
section on the
FILTER section (with filter types LP2, HP2,
page (page 3).
section on the FX / Filter
page of the Sound's Output properties
Working with Plug-ins
The Sampler Plug-in
Pitch / Envelope
page (page 3).
for
MASCHINE - Manual - 309