Native Instruments MASCHINE MK3 Manual page 681

Parameter
FREQ Section
Cutoff
Resonance
MOD Section
Amount
Source
Source: LFO
Speed
LFO Shape
Source: LFO Sync
Speed
LFO Shape
Phase
Source: Envelope
Decay
Smooth
Shape
Description
Controls the cutoff frequency of the filter.
Controls the amount of resonance, i.e. the amount of amplification
near the cutoff frequency. It is not available with filter mode Notch.
This defines how much the Filter gets modulated by the modulation
source.
Here you can select between three different modulation sources:
LFO, LFO Sync, and Envelope. Depending on your choice for the
modulation source, the following parameters appear to the right:
Defines the speed of the modulation in hertz ranging from 0.03 Hz
up to 16 Hz.
Defines how the LFO evolves over time.
Defines the speed of the modulation in note values from 16/1 (one
cycle every 16 bars) up to 1/32 note.
Defines how the LFO evolves over time.
Adjusts the start phase of the LFO.
With Decay you adjust how fast the envelope fades out.
Smooths the shape of the envelope.
Change the shape of the envelope here.
Effect Reference
Filtering Effects
MASCHINE - Manual - 681