4.
Press Button 5/6 to select OUTPUT.
The Output properties are shown in the displays of your controller (in the example under-
neath we show the Output properties of a Sound).
5.
Press the right Page button to select the
6.
Turn Knob 1
(Aux 1
In addition to the usual entries available in both fields, you will find all the Sounds and
Groups with an Effect Plug-in loaded in their first Plug-in slot — see
Up a Sound or Group as Send
Aux
DEST.) to assign the first auxiliary output to the desired send effect.
Effect. For each Sound, the entry shows the Group letter
page of parameters.
Using Effects
Creating a Send Effect
↑13.3.1, Step 1: Set
MASCHINE - Manual - 654