Native Instruments MASCHINE MK3 Manual page 671

Main Page
The Limiter in the Control area: Main page.
Element
MODE Section
Mode
DEPTH Section
(Transparent mode
only)
Threshold
Release
OUTPUT Section
Ceiling
Description
Selects from two different limiter types. The available modes are
Legacy and Transparent.
This value determines the threshold where the Limiter kicks in. If you
use it to prevent your signal from clipping, leave it at 0 dB; if you
want to make your signal louder, dial the Knob to the left. Available
values range in decibels from -40.0 dB to 0.0 dB (default: 0.0 dB).
The time the limiter will take to stop limiting after the input signal
falls below the threshold. With longer release times it takes more
time to get back to normal. Available values can be adjusted in
milliseconds from 1.0ms to 500.0ms (default: 1.0ms).
Adjusts the maximum output level, or ceiling. The signal will not rise
above this. Available values range in decibels from -40.0 dB to -0.3
dB (default: -0.3 dB).
Effect Reference
Dynamics
MASCHINE - Manual - 671