Creating A Send Effect - Native Instruments MASCHINE MK3 Manual

Hide thumbs Also See for MASCHINE MK3:

Table of Contents

When you have found the Plug-in you want to use, press the 4-D encoder or Button 8

(LOAD) to load it. You can also use Buttons 5 and 6 to step through the list and load each

effect directly.

The selected effect is loaded in a new Plug-in slot and directly starts to process your ex-

ternal audio. By pressing

Control mode and adjust the effect.

Creating a Send Effect

Sometimes you may want to have a classic send effect, for example a reverb which can be

shared by multiple sound sources. To make use of a send effect, you need to:

▪ Step 1: Set up a Sound or Group as send effect. This is done by loading an effect into its

first Plug-in slot:

↑13.3.1, Step 1: Set Up a Sound or Group as Send

▪ Step 2: Route a portion of the desired audio signals from their original Sounds and Groups

to that send effect. This is done via the Output properties of the corresponding Sounds and

↑13.3.2, Step 2: Route Audio to the Send

Step 1: Set Up a Sound or Group as Send Effect

The procedure to set up a Sound or Group as a send effect is straightforward: You just need to

load an effect into its first Plug-in slot — MASCHINE will take care of the rest and make it

available as destination for other channels of your Project!

The procedure in Arrange view is described here. You can also do this in Mix view — see

↑13.1.1, Adding an

In this example we will use an empty Sound:

Choose the empty Sound you want to use as send effect: On the left of the Arranger click

the Group containing that Sound, on the left of the Pattern Editor click the desired Sound

slot, and click the

tab in the top left corner of the Control area.

again you can switch back to

Using Effects

Creating a Send Effect

MASCHINE - Manual - 648

Show Quick Links

Table of Contents