Native Instruments MASCHINE MK3 Manual page 474

1. Turn Knob 5 and 6 to zoom in/out and scroll on the time axis (horizontal axis), respective-
ly.
2. If your pads are in Keyboard mode, turn Knob 7 to scroll on the pitch axis (vertical axis)
from events at the lowest pitch until events at the highest pitch.
Under the left display Knob 1–4 provide following editing functions:
Editing Tool
Knob 1 (POSITION)
Knob 2 (PITCH)
Description
Nudges selected events, i.e. shifts selected events on the timeline
according to the Nudge Grid (the events' offsets relative to the Nudge
Grid are preserved). Hold
override the Nudge Grid quantization and adjust the positions in
extremely small increments. See section
Grid and the Nudge Grid
If one event only is selected, its position is shown under POSITION. If
several events are selected, the field shows (MULTI).
See also the alternate method described below.
Transposes the selected events by semitones.
If one event only is selected, its pitch is shown under PITCH. If several
events are selected, the field shows (MULTI).
See also the alternate method described below.
SHIFT while you turn the knob to temporarily
↑10.1.7, Adjusting the Step
for more information on the Nudge Grid.
Working with Patterns
Editing Events
MASCHINE - Manual - 474