Native Instruments MASCHINE MK3 Manual page 813

Hide thumbs Also See for MASCHINE MK3:
Table of Contents

Advertisement

Click the
INPUT
selector to choose between the available inputs:
▪ If
SOURCE
is set to
inputs In 1–4.
▪ If
SOURCE
is set to
inputs: the left ("L") or right ("R") channel of each input pair In 1–4.
▪ If
SOURCE
is set to Internal, you can select the output of any available Group or the Mas-
ter.
You can easily record the output of a particular Sound by setting
soloing this Sound and selecting its parent Group in the
You can also set
and record your live improvisations on the pads while playing this drum kit! You will
then have your own improvisations recorded as Samples, ready to be used, edited,
sliced, etc., as any other Samples in MASCHINE!
Choosing a Recording Mode
Click the
MODE
selector to select from the two available recording modes:
▪ Sync: If
Sync
is selected, you can synchronize the recording function to the sequencer, so
that the recording starts in sync with the sequencer after you clicked Start. The recording
will start at the top of the next bar. The
a length for the Sample to be recorded: either 1, 2, 4, 8, or 16 bars — or choose Free if
you don't want to set any duration limit to the recording. At any time you can click
stop the recording before the duration defined by
ing will then stop at the next bar.
▪ Detect: If
Detect
is selected, you can set a certain threshold using the
on the right. After you clicked Start, the input signal level exceeding this threshold will
start the recording. You can then manually stop the recording by clicking Stop. This is use-
ful to record a singer or an instrumentalist, for example. You can also adjust the threshold
by dragging the slider that appears on the horizontal input level meters above the
ING
section:
Ext.
Ster., you can select either of MASCHINE's four external stereo
Ext.
Mono, you can select either of MASCHINE's eight external mono
SOURCE
to Internal, choose as
LENGTH
SOURCE
INPUT
selector!
INPUT
a Group with a drum kit loaded,
control on the right allows you to choose
LENGTH
has been reached — the record-
Sampling and Sample Mapping
Recording a Sample
to Internal,
Stop
to
THRESHOLD
control
RECORD-
MASCHINE - Manual - 813

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents