Native Instruments MASCHINE MK3 Manual page 842

Hide thumbs Also See for MASCHINE MK3:

Table of Contents

Adjust the slicing settings via Knob 1–4.

Any change to these settings will directly affect the number and position of the Slice markers

shown in the waveform on the displays.

Selecting and Pre-Listening the Slices with the Pads

At any time, the proposed Slices are also available on your pads: The fully lit pad indicates the

selected Slice, while the dim lit pads indicate the other Slices.

Press any fully or dim lit pad to play back the corresponding Slice on the Cue bus (see

↑12.2.6, Using the Cue Bus

For more information on the Cue channel, please refer to section

If there are more than 16 Slices, you can select which set of 16 Slices should be triggered by

If there are more than 16 Slices, press

previous/next 16 Slices, respectively.

Note that we haven't applied any slicing yet: For now your pads only allow you to prelis-

ten how the proposed would sound after you apply the slicing. Applying the slicing will

be described in section

Slicing Parameters

Following parameters are available:

for more information).

↑16.4.5, Applying the

↑12.2.6, Using the

+ Button 7 or 8 to switch your pads to the

Sampling and Sample Mapping

Slicing a Sample

MASCHINE - Manual - 842

Show Quick Links

Table of Contents