Native Instruments MASCHINE MK3 Manual page 552

2. To adjust the level and panoramic position of the main output, use the channel's fader
and balance control (above the fader), respectively.
This is equivalent to setting the
(see above).
3. To select another destination for the Master output, click the first area under the level
meter and select the desired destination in the menu.
This is equivalent to setting the
In this Master/Cue channel strip, do the following to configure the output of the Cue channel:
Level or Pan parameters in the
Output parameter in the
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
MAIN section, respectively
MAIN section (see above).
MASCHINE - Manual - 552