Applying Choke - Native Instruments Maschine Jam Manual

Adding Swing to a Group
To add Swing to a Group channel:
1. Press the SWING button.
2. To change the Swing of a Group, press a Group button A-H. If your Project contains more
than eight Groups, use the left and right arrows of the D-pad to access other Group banks.
3. Turn the Encoder to select GROUP.
4. Push the Encoder and then turn it to select the Group Swing value. Hold
turn the Encoder to adjust the value in finer increments.
5. Alternatively, you can use the Smart Strips to adjust the Swing value.
Adding Swing to a Sound
To add Swing to a Sound channel:
1. Press the SWING button and press the button of the desired Sound 1-16.
2. Turn the Encoder to select SOUND.
3. Push the Encoder and then turn it to select the Sound swing value.
4. Press and turn the Encoder to adjust the value. Hold
adjust the value in finer increments.
5. Alternatively, you can use the Smart Strips to adjust the Swing value.
6.2.5

Applying Choke

The Choke All Notes feature allows you to kill any note or event currently playing in your
Project. This affects the audio coming from all Plug-ins.
Choke All Notes is only available on your controller:
Press SHIFT + MUTE
►
Choke All Notes can be useful in various situations:
(CHOKE) to choke all playing notes.
Recording and Editing Patterns
Playing and Programming Beats
SHIFT
SHIFT while you turn the Encoder to
MASCHINE JAM - Manual - 81
while you