Native Instruments MASCHINE MK3 Manual page 652

9. When you have found the effect you want to use (e.g., the MASCHINE Compressor), press
the 4-D encoder or Button 8 to load it. You can also use Button 5/6 to step through the
list and load each effect directly.
10. Switch back to Control mode by pressing
again).
Now you can edit the effect parameters using Knobs 1–8 and the Page buttons as usual
→
(see ↑2.3.9, Navigating Channel Properties, Plug-ins, and Parameter Pages in the Control
Area). When you load an effect into the first Plug-in slot of a Sound, MASCHINE automat-
ically configures the Sound's input to receive any signal(s) coming from other Sounds and
Groups in your Project and sends them through its own Plug-in slots — in other terms,
you now have a send effect.
You could also load an effect preset from the Browser instead of using the Plug-in
menu. For more information on how to load effect presets, see
Loading Files from the
Now that the effect is loaded, we suggest that you rename the Sound slot to the Plug-in name:
this will be of great help when routing other signals to that send effect (see section
Step 2: Route Audio to the Send Effect
as follows:
1. Double-click the name of the Sound slot in the Sound List.
The name becomes highlighted, ready to be edited.
2. Type the name of the Plug-in, and press [Enter] on your computer keyboard to confirm.
The Sound slot now mirrors the Plug-in name.
→
For more information on renaming Sound slots, see section
Slots.
PLUG-IN
Library.
below). You can rename the Sound slot in the software
(or by pressing SHIFT
↑3.2, Searching and
↑4.2.3, Renaming Sound
MASCHINE - Manual - 652
Using Effects
Creating a Send Effect
+ BROWSE
↑13.3.2,