Native Instruments MASCHINE MK3 Manual page 346

Hide thumbs Also See for MASCHINE MK3:

Table of Contents

Changes to the distortion parameters are only audible when the

Modulation Page

As with all other engines and Drumsynths, the

SCALE Section

Adjusts the timbre of the distortion, measured as a percentage.

Available values range from 0.0 to 100.0 % (default: 50.0 %). At

zero, the distortion is symmetrical and introduces mostly odd

harmonics. As the

more asymmetric and more even harmonics are introduced,

resulting in a different tonality, especially at more subtle

Adjusts the mix between the clean and distorted signal, measured

as a percentage. Available values range from 0.0 to 100.0 %

(default: 50.0 %). At zero, none of the distorted drum will be heard.

At 100.0 %, only the distorted drum will be heard.

Adjusts the velocity response of the drum. Available values range

from -100.0 % to 100.0 % (default value). At zero (mid course),

the drum is played at full velocity, no matter how hard you hit the

keys (or pads). From that mid position, by turning the knob to the

right you increase the positive velocity response and make the drum

more and more sensitive to the velocities at which you hit the keys/

pads. From the mid position, turning the knob to the left as the

inverse effect: the harder you hit the key/pad, the softer the

resulting drum sound will be.

value is increased, the distortion becomes

parameter is set

page contains one parameter:

Using the Drumsynths

MASCHINE - Manual - 346

Show Quick Links

Table of Contents