Send Midi Clock - Native Instruments MASCHINE MK3 Manual

Hide thumbs Also See for MASCHINE MK3:

Table of Contents

If you want to configure MASCHINE to react to other MIDI messages than MIDI Clock,

in particular if you want to control MASCHINE notes and parameters via MIDI, please

refer to section

↑11.2, Using MIDI Control and Host

Send MIDI Clock

If MASCHINE is running as a stand-alone application, it can also send a MIDI Clock signal to

any device that is capable of receiving MIDI Clock. This could be hardware such as a drum

machine, another groovebox, or even another software sequencer.

If you use MASCHINE as a plug-in, it cannot send any MIDI Clock signal. See section

↑2.5, Stand-Alone and Plug-in Mode

To configure MASCHINE to receive MIDI Clock from an external device:

Select Preferences entry from the

section select Master (Send Clock) from the menu.

MASCHINE will send a MIDI Clock signal to any connected device that is capable of re-

ceiving MIDI Clock.

You can adjust the MIDI Clock offset in the

↑2.6.3, Preferences – MIDI Page

If you want MASCHINE to send other MIDI messages than MIDI Clock, in particular if

you want to control other MIDI-capable devices via the notes played in MASCHINE,

please refer to section

for more information on using MASCHINE as a

for more information.

↑11.2.5, Sending MIDI from

Integrating MASCHINE into a MIDI Setup

Automation, where this is described

Basic Concepts

MASCHINE - Manual - 103

Show Quick Links

Table of Contents