Native Instruments MASCHINE MK3 Manual page 57

A controller not connected to any MASCHINE software instance can be used in MIDI
mode (i.e. as a MIDI controller) at the same time as the other controller(s). See the Con-
troller Editor Manual for more information on MIDI mode.
You can choose which controller you want to use with the MASCHINE software. This can be
done both from your controller and in the software.
You can select the desired controller from the
from the Controller submenu in the MASCHINE menu:
Click the MASCHINE menu and select the controller you want to use.
Hardware
On the controller you want to use with the MASCHINE software, do the following:
▪ MASCHINE (MK3) controller: Press
desired instance, and press the 4-D encoder or Button 4 to load it.
Controller menu in the Application Menu Bar or
SHIFT + PLUG-IN, turn the 4-D encoder to select the
Basic Concepts
Common Operations
MASCHINE - Manual - 57