Percussion – Fractal - Native Instruments MASCHINE MK3 Manual

▪ Fractal (default): ↑8.6.1, Percussion –
▪ Kettle: ↑8.6.2, Percussion –
▪ Shaker: ↑8.6.3, Percussion –
For more information on engines, see
synth. For general information on the Snare and the other Drumsynths, see
synths – General
8.6.1 Percussion – Fractal
The Fractal engine is the default engine of the Percussion.
The Fractal percussion mode is based on the feedback oscillator bank from the Fractal tom
(see ↑8.5.2, Tom – Fractal). It's capable of a broad range of sounds, from bell-like to metallic,
cymbal-like, subby, melodic, weird and twisted, and is intended to be played across the key-
board.
The parameters described below are presented as they appear in the Control area (Ar-
range view). The same parameters are available in the Plug-in panel within the Plug-in
Strip (Mix view). See
Main Page
Element
MAIN Section
Engine
Tune
Fractal.
Kettle.
Shaker.
↑8.1.1, Engines: Many Different Drums per Drum-
Handling.
↑12.4, The Plug-in Strip
Description
Selects the engine used in the Percussion Plug-in. If you change
this setting, please refer to
Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 60.00 to
108.00. The default value is 84.00. For more details see
Pitch Range, Tuning, and MIDI
instrument is heavily dependent on the settings on the
page (see below).
for more information on this.
↑8.6, The Percussions.
Notes. Note that the pitch of this
Using the Drumsynths
The Percussions
↑8.1, Drum-
↑8.1.5,
Advanced
MASCHINE - Manual - 403